Marina Gate. Villa Type. Maximize

Marina Gate. Villa Type.

Gate for a Villa building property.

1 unit in each box.

We present a 1/35 scale model reproduction about gate for estate closure representing wrought iron.

This reference will be valid practically for any era, and will add a great touch of realism and elegance in your vignettes and dioramas.

Attention:
This reference contains 3D printed resin pieces, with a resolution of 16 microns per layer, (63 layers per mm, 1590 layers per inch).

For best results we recommend after first priming:

1.- Softly, brush the piece with a thin brush with coarse bristles trimmed and sand the piece lightly with 500 grit sandpaper or higher.

2.- Priming the piece.

3.- Brush again, without applying great pressure, with a pencil of fibers. (remember to protect your eyes with goggles)

4.- Sand it with 1000 grit sandpaper or higher.

5.- Return to priming

NOT hold during handling of the fragile areas.

CompositionsResin
Product code:357530

By buying this product you can collect up to 19 loyalty points. Your cart will total 19 points that can be converted into a voucher of 0,38 €.


Send to a friend

Recipient :

* Required fields

Cancel or