Tannhauser Gate. Mansion. Fence on Wall Main
Fence on Wall for a Mansion building property.
1 unit in each box.
We present a 1/35 scale model reproduction about the fence on wall for estate closure representing wrought iron.
This reference will be valid practically for any era, and will add a great touch of realism and elegance in your vignettes and dioramas.
This reference contains 3D printed resin pieces, with a resolution of 16 microns per layer, (63 layers per mm, 1590 layers per inch).
For best results we recommend after first priming:
1.- Softly, brush the piece with a thin brush with coarse bristles trimmed and sand the piece lightly with 500 grit sandpaper or higher.
2.- Priming the piece.
3.- Brush again, without applying great pressure, with a pencil of fibers. (remember to protect your eyes with goggles)
4.- Sand it with 1000 grit sandpaper or higher.
5.- Return to priming
NOT hold during handling of the fragile areas.
By buying this product you can collect up to 8 loyalty points. Your cart will total 8 points that can be converted into a voucher of 0,16 €.