Tannhauser Gate. Palace. Double Main
Double Main Gate for an institutional building property.
1 unit in each box.
We present a 1/35 scale model reproduction about double main gate for estate closure representing wrought iron.
This reference will be valid practically for any era, and will add a great touch of realism and elegance in your vignettes and dioramas.
This reference contains 3D printed resin pieces, with a resolution of 16 microns per layer, (63 layers per mm, 1590 layers per inch).
For best results we recommend after first priming:
1.- Softly, brush the piece with a thin brush with coarse bristles trimmed and sand the piece lightly with 500 grit sandpaper or higher.
2.- Priming the piece.
3.- Brush again, without applying great pressure, with a pencil of fibers. (remember to protect your eyes with goggles)
4.- Sand it with 1000 grit sandpaper or higher.
5.- Return to priming
NOT hold during handling of the fragile areas.
By buying this product you can collect up to 36 loyalty points. Your cart will total 36 points that can be converted into a voucher of 0,72 €.